Durston - Draw Bench Assembly Instructions

Twin Speed, Draw Bench Assembly Instructions

Download these instructions
in PDF format

1. Attach the 4 legs

Carefully lay the draw bench on it’s back (chain facing down) and screw on the four legs using the nuts and bolts provided. Ensure you lay the draw bench on something soft so you do not damage the paintwork

2. Fit the 2 cross pieces

Screw the two cross pieces using the nuts and bolts provided

3. Remove Support Pins

Stand the Draw Bench on its legs and unscrew the two support plate pins

4. Fit Draw Plate Support

Insert the draw plate support and then bolt up using the two pins


Online User Guide	Download About Us Home Page Contact Us Products F.A.Q	Download User Guide
Durston Rolling Mills - British Made - In use Worldwide - Registered British Design Site best viewed at 800 x 600 All rights reserved. No part of the publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright owner.