 |
 |
Manual Mills - Mini Mill |
|
|
The most economical mill combining low price with
a great degree of versatility for producing strip and wire at lowest
possible cost.
The very fine calibrated
adjustment on the roll gap allows greatest possible control
over reductions made in each pass together with ease of turning.
The smallest and lightest mill with a big output - widely used as
the first and only machine or often as a back-up to larger mills.
|
Mini C80 4 (4 Groove Combination)
|
|
|
Special helical drive gears incorporated for maximum efficiency.
One piece cast iron housing for great strength with maintenance free bearings
Mini C100 9 (9 Groove Combination)
|
|
Click on each drawing below for a larger view |
Model |
|
|
|
Roller Drawing
|
|
 |
 |
|
80mm x 45mm |
80mm x 45mm |
80mm x 45mm |
|
6mm |
6mm |
N/A |
|
60mm |
80mm |
- |
|
6.5mm - 1mm |
- |
8mm - 1mm |
|
4 |
0 |
16 |
|
- |
- |
- |
|
4 'D' Grooves
4, 3, 2 & 1.5mm |
4 'D' Grooves
4, 3, 2 & 1.5mm |
4 'D' Grooves
4, 3, 2 & 1.5mm |
|
255 x 170 x 265
|
255 x 170 x 265 |
255 x 170 x 265 |
|
15kg |
15kg |
15kg |
|
|
Click on each drawing below for a larger view
|
Model |
|
|
|
Roller Drawing
|
 |
 |
 |
|
100mm x 45mm |
100mm x 45mm |
100mm x 45mm |
|
6mm |
6mm |
6mm |
|
80mm |
60mm |
100mm |
|
6.5mm - 1mm |
6.5mm 1mm |
N/A |
|
4 |
9 |
0 |
|
- |
- |
- |
|
4 'D' Grooves
4, 3, 2 & 1.5mm |
4 'D' Grooves
4, 3, 2 & 1.5mm |
4 'D' Grooves
4, 3, 2 & 1.5mm |
|
280 x 170 x 270
|
280 x 170 x 270 |
280 x 170 x 270 |
|
16kg |
16kg |
16kg |
|
|
|
|
 |
|
Durston Rolling Mills - British Made - In use Worldwide - Registered British
Design
Site
best viewed at 800 x 600
All rights reserved. No
part of the publication maybe reproduced, stored in a retrieval system
or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, without the prior permission of the copyright
owner. |
