Javascript Menu by Deluxe-Menu.com
 
English
French
Spanish
Reversible Ingot Moulds
Back Next

Reversible Ingot Moulds

In the groove configuration (see above) wires / rounds can to be moulded, up to 3 sizes with the 60mm and 4 sizes with the 80mm.

By reversing the Moulds to the Slot configuration, 3mm thick flats can be moulded at any width up to the maximum (see chart below).

One half of the mould is attached to the base, whilst the other half can be moved to either side.

A clamp is supplied to hold the Moulds in place during casting,

Click on image for a larger view
60mm & 80mm Open
 
60mm Clamped for grooves
 
60 & 80mm, Clamped for slots
 
Click on each drawing below for a larger view

Model

Click for Guide

60mm Reversible
Ingot Mould

Mould
Dimensional
Drawings

Groove
Configuration
Drawing

Adjustable Slot
Configuration
Drawing

Mould Height
60mm 80mm
Round Wire Grooves
3, 4 & 5mm 3, 4, 5 & 6mm
Slot thickness
3mm 3mm
Adjustable Slot Width
0 to 30mm 0 to 40mm
Absolute Max Slot Width
35mm 48mm
Base Size
100mm x 50mm 100mm x 50mm
Net Weight
1.1kg 1.6kg

 

 

 
 

Durston Rolling Mills - British Made - In use Worldwide - Registered British Design

Site best viewed at 800 x 600

All rights reserved. No part of the publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright owner.